Warehouse loading bay
Dubai
Pick your aircraft and get the door size, wind class and the right HMI door type.
Plan a hangar →Rolling shutters, rapid and fire-rated doors, docking systems, scaffolding, fabric ducting and wireless sensors from one UAE supplier, with technical help from site survey to after-sales service.
HMI provides total quality management and a full range of services, systems and solutions: sales, technical support, application and, most importantly, after-sales service. We supply doors to the trade, help clients on a consultative basis with complicated installations, and offer an install assist package where we support the survey and the installation engineers.
We understand that the satisfaction of our customers is the only true measure of our success.
About HMI →Choose a division to see the full product range, specifications and datasheets.
Rolling shutters, sectional, rapid, hangar, shop front, garage and specialty doors, plus gate automation and motors.
View range →Hollow metal doors, fire shutters and smoke curtains tested to BS, UL and SDI. Dock levelers and shelters.
View range →Copper cathode, steel billets, aluminium ingots, rails and energy products, with due diligence and contracts.
View range →Cuplock, tubes and couplers, boards, jacks, beams, aluminium towers, podiums and ladders, for sale or rental.
View range →Raised access floors from Italy, portable cabins, gabbro aggregates, anti-slip tape and garbage chutes.
View range →Customised Class A fire-rated fabric air ducts that install faster and spread air evenly.
View range →Wireless sensors with cloud alerts by SMS, email or call, and ESCO energy-saving projects.
How it works →Hover over the explorer to let it cycle through the range, or pick one.
Made to order for almost any opening, needing very little space above, outside or inside. Over 50 curtain slat types in steel or aluminium, single or double skin.
Insulated, glazed, vertical stacking and bi-folding sectional doors for industrial, logistics and loading-bay use, with perfect sealing, insulation and security.
For facilities with a need for speed, such as food, beverage and medical sites, where short opening times reduce cooling loss and airflow.
Hollow metal doors, fire-rated rolling shutters, fire and smoke curtains and lateral sliding shutters, built to keep people and property safe until help arrives.
Dock levelers, dock shelters, draw bridges, scissor lifts and docking accessories for fast, safe loading and unloading.
Polycarbonate, perforated and grille shutters that keep goods on display while securing the shop.
Pick a typical job and watch how HMI handles it, from the first call to after-sales support.
Illustrative examples of a typical HMI process. Timings vary by product, size and site.
Many projects need doors, docking, scaffolding, ducting and monitoring from different suppliers. HMI brings these together, with one team to survey, advise, supply and support.
Flip the switch to compare.
Based on the fabric duct features HMI lists. Bar lengths are illustrative, not measured values.
Hover over or tap a card to see more.
Shutters and doors in steel, stainless steel and aluminium, built to European and American standards.
Fire-rated doors, shutters and curtains tested to BS, UL and SDI, rated from 20 minutes up to 3 hours, and sliding shutters to 4 hours.
New customers get our install assist package: we help with the survey and support the installation engineers.
Colours, sizes, glazed panels and insulation levels to suit each opening and project.
Clients can use our experience on a consultative basis for extra help with complicated installations.
Sales, technical support, application and after-sales service from one team.
Choose a product, size, quantity and emirate. Results update instantly.
Indicative only. Rates in this demo are placeholders for HMI to confirm; the final price depends on site survey, specification and quantity.
Free tools built around HMI’s products. Every result can be sent to us as a quote request.
Client logos will appear here once HMI confirms which clients may be named.
These are the product standards stated for HMI’s ranges. Company certificates (for example ISO) can be added here once confirmed.
Sample projects shown until HMI provides real references.
Dubai
Dubai
Abu Dhabi
Sharjah
Ajman
Ras Al Khaimah
Both. HMI markets, supplies and installs doors and shutters. For trade customers we also offer an install assist package, helping with the survey and supporting your installation engineers.
Steel, stainless steel and aluminium, to European and American standards. Many ranges can be insulated, glazed or painted to your colours.
Our fire-rated products are tested to BS, UL and SDI standards, with ratings from 20 minutes to 3 hours. Lateral sliding shutters are tested for 1, 2 and 4 hours to BS.
Yes. We offer cuplock scaffolding for sale and for rental.
Send us the openings and quantities. We’ll survey, specify and quote.
Doors and shutters, docking, fire-rated products, commodities, scaffolding and access, construction services and HVAC fabric ducting. Choose a range to see features, specifications, applications and benefits, then request the datasheet.
HMI Doors are specialists in high quality hangar doors, industrial and commercial doors, rolling shutters, high-speed doors, shop fronts, dock levelers and shelters, flap doors, PVC strip curtains, blast-proof doors, fire-rated and non-fire-rated hollow metal doors, gate and door operators and residential doors. Shutters and doors are available in steel, stainless steel and aluminium to European and American standards.
Made to order for almost any opening, needing very little space above, outside or inside. Over 50 curtain slat types in steel or aluminium, single or double skin.
| Slat pitch | 75 mm or 100 mm (solid slat) |
|---|---|
| Slat thickness | 0.7, 1.0, 1.2 and 1.5 mm |
| Insulated lath pitch | 77 mm or 90 mm |
| Continuous profile max. size | 5000 mm W × 5000 mm H |
| Operation | Manual or electrical |
Insulated, glazed, vertical stacking and bi-folding sectional doors for industrial, logistics and loading-bay use, with perfect sealing, insulation and security.
| Steel panel thickness | 40, 42 and 45 mm |
|---|---|
| Aluminium panel thickness | 42 and 51 mm |
| Max. size (insulated) | 7000 mm W × 7000 mm H |
| Track system | 2" and 3": standard, high lift, full vertical, low headroom, follow roof line |
| Wind load (vertical stacking) | Class 4 (140 km/h) |
| Options | Wind load, electric operator, chain hoist, photocell, remote, bottom-sensing edge, glazing |
For facilities with a need for speed, such as food, beverage and medical sites, where short opening times reduce cooling loss and airflow.
| Roll-up speed | Up to 2.0 m/s |
|---|---|
| Roll-up max. size | 6000 mm W × 6000 mm H |
| Fabric | PVC, 900 / 1200 gsm |
| Fold-up max. size | 12000 × 10000 mm, 0.7 m/s, winds up to 150 km/h |
| Spiral door | Up to 1.5 m/s, 6500 × 6000 mm, 40/50/80 mm insulated laths |
Hollow metal doors, fire-rated rolling shutters, fire and smoke curtains and lateral sliding shutters, built to keep people and property safe until help arrives.
| Standards | Tested to BS, UL and SDI |
|---|---|
| Fire rating range | 20 minutes to 3 hours (lateral sliding shutters tested for 1, 2 and 4 hours to BS) |
| Labels | BS or UL labels; masonry and non-masonry applications |
| Curtains | Tested to BS, EN, ASTM and UL |
A complete line of steel doors for commercial, institutional and industrial projects, made from galvanneal steel for corrosion protection inside and out.
| Door thickness | 45 mm (1¾") full flush, to SDI-111A |
|---|---|
| Steel gauge | 1.2 mm (18 ga) or 1.5 mm (16 ga) |
| Fire label | Tested to UL10(B), up to 3 hours |
| Max. door opening | 1220 × 2438 mm single; 2438 × 2438 mm pair |
| Jamb depth | 120 mm to 323 mm |
Dock levelers, dock shelters, draw bridges, scissor lifts and docking accessories for fast, safe loading and unloading.
| Leveler capacity | 6 t standard (60 kN dynamic, 84 kN static) |
|---|---|
| Leveler width | 1750, 2000, 2200, 2250 mm |
| Leveler length | 2000, 2450, 3000, 3500 mm |
| Shelter width | 3200–3600 mm |
| Shelter height | 3200–4700 mm |
| Draw bridge capacity | 6 t |
Polycarbonate, perforated and grille shutters that keep goods on display while securing the shop.
| Polycarbonate | 4 mm, UV protected, around 80% visibility |
|---|---|
| Perforated slat | About 48% visibility, powder coat to any colour |
| Motor | 230 V single phase; push button to remote |
| Sliding panels | Up to 4200 mm high |
Five types of residential garage door, with manual or electric operation.
| Panel thickness | 38 mm / 40 mm |
|---|---|
| Skin thickness | 0.45 mm |
| Standard height (sectional) | 2440 mm |
| Standard widths | 3000 to 6000 mm |
| Continuous profile max. | 4000 × 4000 mm |
Fabric mega fold-up, aluminium-framed, sliding folding and sliding telescopic hangar doors, each designed for its site and wind conditions.
| Fold-up max. size | 30000 mm W × 20000 mm H |
|---|---|
| Wind load | Class 4 (140 km/h) |
| Sliding folding headroom | From 160 mm |
| Operation | Manual, optional electric drive |
Keep the inside climate steady at openings, saving energy and keeping out dust and pests.
| Strip rolls | 200 × 2 mm, 300 × 3 mm, 400 × 4 mm; 50 m rolls |
|---|---|
| Grades | Normal and freezer |
| Flap door structure | GI, stainless steel or powder-coated GI |
| Flap panels | Clear PVC 5–7 mm, mixed, or TRIS |
Parking barriers, bollards, swing and sliding gate operators, turnstiles and motors for shutters and sectional doors.
| Barrier arm | 3.5 m, 6 m or 8 m |
|---|---|
| Barrier opening | Push button, remote, access card, long-distance reader, mobile phone, magnetic loop |
| Sliding gate operators | Gates up to 300–1800 kg |
| Shutter motors | 200 to 2000 kg capacity |
| Garage operators | 700 / 800 / 1000 N |
Blast-resistant, oversized and cold room doors for demanding sites.
| Blast doors | Tested and certified by a reputed laboratory |
|---|---|
| Cold room doors | Galvanised painted or stainless steel, manual or automatic |
| Oversized doors | Designed to the opening |
HMI’s commodity trading division trades in the metals and energy sectors. We act as a mandate or facilitator, introducing real buyers to real sellers, and arrange contracts between established sellers and buyers. We handle the due diligence, legal consultancy and contracts for our clients.
Sourced only from reputed manufacturers or vendors. Electrolytic copper grade, non-LME Grade A standard Cu cathodes.
| Purity | 99.98–99.99% Cu min. |
|---|---|
| Supply | 5,000 to 25,000 MT per month |
| Sheet size | 914 × 914 × 12 mm (approx.) |
| Sheet weight | 125 kg ±1% |
| Pallet | 2 MT ±1%, banded with aluminium bands |
| Container | Min. 20 MT net, 22.2 MT gross (approx.) |
Steel billet, square steel and steel square bar.
| Grades | 3SP/PS, 5SP/PS, Q195, Q235, Q255, Q275, 20MnSi, SS300, SS400 |
|---|---|
| Length | 3–12 m |
| Standards | AISI, ASTM, BS, DIN, GB, JIS |
Aluminium ingot A7, with specialised castings also available.
| Purity | At least 99.8% |
|---|
New and used rails to R50 and R65 specifications.
| R50 | GOST 7173-75, 51.67 kg/m |
|---|---|
| R65 | GOST 8165-75, 64.72 kg/m |
| Carbon | 0.54–0.82% |
| Impurities | Not over 5% |
Our team’s experience with producers, leading oil traders and energy multinationals helps us put deals together, assess risk and advise on trading, transport and supply.
| Other products | Can be discussed and arranged |
|---|
Sales and rental of high-quality scaffolding at a reasonable price: the cuplock system, tube and fittings, boards and planks, jacks, beams, aluminium mobile towers, podiums, ladders and tools. Steel components are galvanised.
Standards made from 48.3 × 3.2 mm steel tube with a fixed lower cup every 500 mm and a captive top cup that locks up to four horizontals in one joint.
| Tube | 48.3 mm OD × 3.2 mm |
|---|---|
| Cup spacing | 500 mm |
| Standards (m / kg) | 1.0 / 5.0 · 1.5 / 7.9 · 2.0 / 10.9 · 2.5 / 13.4 · 3.0 / 16.1 |
| Ledgers (m / kg) | 0.6 / 2.3 · 1.2 / 4.8 · 1.3 / 5.2 · 1.8 / 7.0 · 2.5 / 9.5 |
| Intermediate transoms (m / kg) | 0.6 / 4.3 · 1.3 / 6.7 · 1.8 / 8.4 · 2.5 / 10.8 |
| Spigot | 0.5 kg |
| Supply | Sale or rental |
Galvanised scaffold tubes compatible with all fittings, and drop-forged or pressed-steel couplers for 48.3 mm tube.
| Tube | 48.3 mm OD, 4.0 or 3.2 mm wall, various lengths |
|---|---|
| Tube finish | Black or galvanised |
| Couplers | Drop forged (double, swivel, single, sleeve, gravlok) |
| Clamps and pins | Pressed steel |
Timber, LVL and steel platforms in the standard 38 × 225 mm section.
| Section | 38 mm thick × 225 mm wide |
|---|---|
| Lengths | 3000 and 3900 mm (cut sizes available) |
| LVL origin | Finland, Russia or China |
| Timber origin | Austrian, German, Swedish or other European wood |
Adjustable base jacks, universal jacks, U-head jacks and plain base plates to level and support any scaffold.
| Jack tube | 38 mm OD × 5.0 mm wall |
|---|---|
| Base plate | 150 × 150 × 5.0 / 6.0 mm |
| Base jack lengths | 600 and 760 mm |
| Universal jack | 600 mm |
| Plain base | 38 × 100 mm pipe on 150 × 150 × 6 mm plate |
Welded lattice beams that bridge openings in a scaffold or form prefabricated temporary structures.
| Ladder beam | 48.3 mm OD × 4.0 mm tube, 3.0–6.0 m |
|---|---|
| Unit beam chords | 48.3 mm × 4 mm tube to BS 1139, 2.44 or 3.6 m, verticals at 610 mm |
| Diagonals | 27 mm OD × 3.2 mm, grade 13C BS 4380 |
| Connection | M20 × 50 bolts, nuts and washers supplied |
Lightweight aluminium mobile towers, folding towers and podiums: rust-proof, easy to move and quick to assemble.
| Alloy | 6061 T6, 2.5 mm frame tube |
|---|---|
| Double width | 1200 / 1390 / 1600 / 2000 mm wide, 1780–2980 mm long; SWL 700 kg tower, 250 kg per platform |
| Single width | 780 mm wide, 1580–2080 mm long; SWL 600 kg tower, 225 kg per platform |
| Frames | 1.5 m and 2.0 m, 7 rungs per 2.0 m frame |
| Platform capacity | 200 kg/m² |
| Folding tower | 780 × 1780 mm platform at 1080 mm, SWL 150 kg |
| Podium | Platform 1.0 or 1.3 m, SWL 150 kg, 4 braked castors |
Industrial-duty timber, steel and aluminium ladders built to British and European standards.
| Timber pole | Max. safe load 175 kg, duty rating 130 kg, 3–10 m, Scandinavian white-wood stiles, 2 coats varnish |
|---|---|
| Steel | Verticals 50 × 25 × 2 mm, rungs 30 × 30 × 2 mm, BS EN 131:1993 |
| Aluminium | BS EN 131 |
Everything a scaffolding crew needs, from spare cups and blades to tags and tool belts.
| Compatibility | Cuplock and 48.3 mm tube systems |
|---|---|
| Supply | Ex-stock |
Complete raised access flooring systems from Italy, prefabricated cabins, aggregates, anti-slip tape, garbage chute systems and solid-surface kitchen tops.
A complete raised / access flooring system from Italy: 600 × 600 mm panels, galvanised steel structures for every load and height, and finishes from porcelain to parquet.
| Panel size | 600 × 600 mm |
|---|---|
| Calcium sulphate panel | 34 or 28 mm (20–36 mm on request), class 0 / A1 (DIN 4102), REI 90 / RE 120, 1500 kg/m³ |
| Chipboard panel | 38 mm standard, 28 mm on request (with stringers) |
| Stone panel | 600 × 600 × 13 mm calcium sulphate on 0.5 mm galvanised steel |
| KGX1 structure | Multi-purpose, snap-on U stringers, optional screw fixing |
| KGX2 structure | Stringerless, bases fixed to slab, for very low heights |
| KGX4 structure | Heavy duty, closed-section stringers bolted to heads, highest loads and floor heights |
Steel-framed portable and modular buildings, including fire-rated cabins, for hire or purchase.
| Construction | Steel frame |
|---|---|
| Supply | Hire or buy |
Bulk supply of gabbro aggregates, a hard, strong igneous rock suited to a wide range of construction and engineering projects.
| Sizes | 0–5, 5–10, 10–20, 20–25, 20–32, 20–37.5 and 20–42 mm |
|---|
Premium long-life self-adhesive anti-slip tape with bonded 60-grit aluminium oxide.
| Widths | 19 mm to 914 mm |
|---|---|
| Roll length | 18.3 m |
| Formats | Rolls, pre-cut strips, custom die cuts |
Supply and installation of garbage chute systems, and supply of Corian / solid-surface kitchen tops.
| Detailed specs | Ask for the datasheet |
|---|
We provide integrated A/C ducting solutions and reliable fabric ducts, focusing on customised fabric air ducts for the HVAC/R industry.
Customised fabric air ducts with even air distribution, lower weight and much faster installation than traditional ducting.
| Fire rating | Class A: non-combustible, ultra-fine silica fibre base; all parts and zips non-flammable |
|---|---|
| Permeation | Fluoride nano-coating for finely controlled permeability |
| Temperature range | −190 °C to +260 °C |
Wireless sensors for temperature and humidity, doors, vehicles, occupancy, water leaks, carbon monoxide, nitrogen and motion, with cloud storage and alerts by SMS, email or phone call. Plus ESCO projects from energy audit to verified savings.
Tell us what you need. Products not listed can often be sourced on request.
Twelve free tools for doors, hangars, loading bays, ducting and scaffolding. Each result can be sent straight to HMI as a quote request.
Results are indicative and use standard engineering rules. HMI’s team confirms every figure at survey.
Enter the site measurements. The engine checks every HMI door type against the opening and the space around it, picks the best one and builds its size sheet.
These are typical industry values. Change any number and every result updates at once. Changes are saved in this browser; "Copy rules" gives the full set to paste into the website code.
Indicative. Final sizes come from HMI’s site survey and factory rules.
Pick the aircraft you need to house. The planner works out the clear door opening and the HMI hangar door types that fit.
Rules used: door width ≥ wingspan × aircraft + clearances; height ≥ tail height + clearance; depth ≥ length + 3 m. Aircraft dimensions are published manufacturer figures. Indicative only.
Answer four quick questions.
Compare cooling lost through a busy opening with a standard door and with an HMI high-speed door.
Method: stack-effect airflow through the open area (Cd 0.6), cooling COP 3, 20 s hold-open, standard door 0.25 m/s vs rapid door up to 2 m/s, UAE grid ~0.4 kg CO₂/kWh. Indicative; tariff and grid factor to be confirmed.
Rule: minimum length = height difference ÷ maximum gradient (EN 1398 caps service gradient at 12.5%). HMI lengths: 2000, 2450, 3000, 3500 mm; standard capacity 6 t.
Pressure q = 0.613 × v² (v in m/s). EN 12424 classes: 1 = 300 Pa, 2 = 450 Pa, 3 = 700 Pa, 4 = 1000 Pa, 5 = above 1000 Pa. Your structural engineer confirms the design wind speed.
D = √(4Q ÷ πv), rounded up to 50 mm, max. 1250 mm per run. Target inlet velocity 2–4 m/s quiet spaces, 4–7 m/s halls, up to 8 m/s industrial. All HMI fabric is Class A fire rated.
Estimate for a single-row façade scaffold, 2.0 m lifts, fully boarded every lift. Cuplock standard, ledger and transom weights are HMI’s published figures; board and jack weights are typical. Ties, bracing and edge protection are confirmed by HMI’s scaffold design.
Plan a raised access floor from HMI’s Italian system: 600 × 600 mm panels on galvanised steel structures.
Panels on a 600 mm grid, pedestals at every grid corner, 3% allowance for cuts. Panel data from HMI’s system: calcium sulphate 34 mm (1500 kg/m³, REI 90 / RE 120), chipboard 38 mm, inert stone panel 13 mm on steel. Indicative.
Pick the height you need to reach and the space you have. The selector picks a podium, folding tower or mobile tower from HMI’s range.
Working height ≈ platform height + 2 m. HMI data: alloy 6061 T6; double width SWL 700 kg tower / 250 kg per platform; single width 600 / 225 kg; folding tower and podium 150 kg; frames 1.5 m and 2.0 m. Stabilisers and safe erection follow the manufacturer’s instructions. Indicative.
HMI stock rolls: 200 × 2 mm, 300 × 3 mm, 400 × 4 mm, 50 m long, normal and freezer grade. Strips are cut 100 mm longer than the opening.
Key figures from HMI’s product information.
| Door | Max. size | Speed | Wind load | Insulation | Fire rating | Best for |
|---|---|---|---|---|---|---|
| Industrial rolling shutter | Made to order (continuous profile 5 × 5 m) | Standard | Wind-rated slats on request | Double-skin option | Fire-rated version | Warehouses, factories |
| Insulated sectional door | 7 × 7 m | Standard | Wind load options; vertical stacking Class 4 | 40–51 mm panels | – | Loading bays, logistics |
| High-speed roll-up door | 6 × 6 m | Up to 2.0 m/s | Indoor use | Spiral version 40–80 mm | – | Food, pharma, clean rooms |
| High-speed fold-up door | 12 × 10 m | 0.7 m/s | Winds up to 150 km/h | – | – | Large external openings |
| Fabric mega fold-up hangar door | 30 × 20 m | Standard | Class 4 (140 km/h) | Double-skin fabric | – | Aircraft hangars |
| Fire-rated hollow metal door | 1220 × 2438 mm single | – | – | Insulated cores | Up to 3 h (UL10B) | Escape routes, plant rooms |
| Lateral sliding fire shutter | Large and curved openings | Closes on alarm | – | – | 1, 2 and 4 h (BS) | Malls, hospitals, stations |
Send your tool results and drawings. HMI confirms sizes, standards and lead times.
Wireless sensors for temperature, humidity, doors, vehicles, occupancy, leaks and gases, with cloud storage and alerts by SMS, email or phone call. Plus ESCO energy-saving projects from audit to verified savings.
Demo dashboard with sample data.
Choose your type of site.
Know the moment a cold room drifts out of range.
Spot doors left open that waste cooling.
SMS, email or a phone call when readings change.
All readings stored in the cloud for your records.
Know when a bay or dock is occupied.
Count vehicles in and out of a site or car park.
Gas sensors for enclosed areas.
Monitor activity after hours.
See which spaces are actually used.
Catch leaks before they cause damage.
Wireless sensors are quicker and more economical to fit.
Check your sites from your phone or online.
Each step plays an example. Click any step to jump to it.
Click the numbered points, or take the tour, to see the nine sensor types.
As an ESCO, HMI provides everything needed to design and implement a project at your facility, from the first energy audit to long-term Monitoring and Verification (M&V) of savings.
Illustrative project. Real savings and payback depend on the audit findings.
No. The sensors are wireless and connect to Wi-Fi through a router. One gateway can serve many sensors, over a wide range and through several walls, which makes the system more economical.
All data can be stored in the cloud. If a reading changes outside its range, an alert is sent by SMS, email or even a phone call. You can also check readings in a mobile app or online.
Temperature and humidity, door open-close, vehicle detection and counting, occupancy, water leakage, carbon monoxide, nitrogen, motion and activity.
An energy audit, a tailored set of measures (energy efficiency, renewables, distributed generation, water conservation and sustainable materials and operations), implementation, and Monitoring and Verification of the savings.
Explore projects on the map or filter by product line. Sample projects: to be replaced with real HMI references
Dubai
Dubai
Abu Dhabi
Sharjah
Ajman
Ras Al Khaimah
Fujairah
Al Ain
Send us your drawings or opening schedule for a quote.
HMI Building Material Trading LLC markets, supplies and installs doors and shutters, docking systems and lifting equipment, and supplies commodities, construction materials, HVAC fabric ducting and smart solutions from Ras Al Khor Industrial Area 1, Dubai.
HMI Building Material Trading provides total quality management and a full range of services, systems and solutions: from sales and technical support through to application and, most importantly, after-sales service.
Our doors and shutters are available in steel, stainless steel and aluminium to European and American standards, and can be supplied in a range of colours, sizes and specifications, such as with glazed panels or high levels of insulation.
To supply reliable doors, building materials and systems to recognised standards, with the technical support and after-sales service our customers need. Draft: HMI to confirm
We understand that the satisfaction of our customers is the only true measure of our success.
Figures are taken from HMI’s product information.
Three parts that work as one. Choose one to explore.
An enormous range of branded security products, roller doors and security doors, supplied to the trade and to end users, alongside commodities and construction materials.
We supply and install, and for trade customers our install assist package helps with the survey and supports the installation engineers.
Technical support through to application, and after-sales service once the job is handed over.
Flip each card to see how we fix it.
Busy doors let conditioned air escape.
Hover to see our fix ↻Rapid doors up to 2 m/s, air curtains and PVC strip curtains.
Large voids and openings need protection.
Hover to see our fix ↻Fire-rated doors, shutters and curtains tested to BS, UL and SDI.
Truck and dock heights don’t match.
Hover to see our fix ↻Dock levelers, shelters, draw bridges and scissor lifts.
Metal ducts take time and add weight.
Hover to see our fix ↻Light fabric ducts that install faster and spread air evenly.
The principles behind how we supply and support. Draft: HMI to confirm
The only true measure of our success.
Products built and tested to recognised standards.
Consultative help on complicated installations.
Dealing only with reputed manufacturers and vendors.
Run warehouses, logistics and loading bays
Need controlled climates for food, pharma and cold chain
Secure shops, malls, banks and public buildings
Build, fit out and supply construction projects
HMI Building Material Trading LLC
Street 5, Ras Al Khor Industrial Area 1, Dubai, UAE · P.O. Box 94358
Opening hours: to be confirmed
Buying guides, standards explained and product comparisons, with an AI summary on every article for busy readers.
Speed, flexibility, weight and cost compared for UAE sites.
Speed, flexibility, weight and cost compared for UAE sites.
Calcium sulphate or chipboard, KGX1, KGX2 or KGX4, and which finish to bond on top.
Slat type, insulation, wind and motor sizing: what to decide before you order.
How to read a fire rating and what to check on site.
Why fast doors cut cooling losses at busy openings.
Installation time, energy use, comfort and cleaning compared.
Temperature, door, leak and occupancy alerts without new cabling.
Lip type, length, capacity and shelter size, step by step.
Request any document and our team will email it to you.
Overview of all HMI product lines.
Slat types, sizes and operation options.
Panels, tracks, wind load and options.
Roll-up, fold-up and spiral door specs.
Construction, gauges, labels and sizes.
Standards and typical applications.
Sizes, lips and capacities.
Roll sizes, grades and flap door models.
R13 rating, sizes and applications.
Gabbro sizes for bulk supply.
Standards, ledgers and transoms by length and weight.
Sizes, frames and safe working loads.
Panels, KGX structures and finishes.
Fire class, permeability and temperature range.
Purity, dimensions and packing.
Occasional emails with new products, guides and datasheets.
Everything you need to know about our products, supply, installation and trading.
HMI Building Material Trading LLC markets, supplies and installs doors and shutters, docking systems and lifting equipment, and supplies commodities, construction materials and services, HVAC fabric ducting and smart solutions.
Street 5, Ras Al Khor Industrial Area 1, Dubai, UAE (P.O. Box 94358). We supply across the UAE.
Use the 3-step form on the Contact page, call +971 4 267 6703, or email info@hmi.group with your openings, sizes and quantities. For a quick idea, try the quote estimator on the home page.
Yes. We provide technical support through to application, and after-sales service.
Steel, stainless steel and aluminium, to European and American standards.
Yes. Doors can be supplied in a range of colours, sizes and specifications, for example with glazed panels or high levels of insulation.
High-speed fabric roll-up doors reach up to 2.0 m/s depending on size and model; spiral insulated doors up to 1.5 m/s; fold-up doors 0.7 m/s.
For new customers buying doors for their own installers, we assist on the site survey and support the installation engineers.
The standard capacity is 6 tons (60 kN dynamic, 84 kN static); other capacities on request. Lips are swing, telescopic or tapered.
They are tested to BS, UL and SDI standards. Fire and smoke curtains are tested to BS, EN, ASTM and UL. Fire-rated frames can be labelled and listed by UL or Warringtonfire-Mideast.
From 20 minutes up to 3 hours depending on the product. Hollow metal doors are tested to UL10(B) and labelled up to 3 hours. Lateral sliding shutters are tested to BS for 1, 2 and 4 hours.
We act as a mandate or facilitator, introducing real buyers to real sellers and arranging supply contracts between established parties. We handle due diligence, legal consultancy and contracts.
Metals (copper cathode, steel billets, aluminium ingots, rails R50/R65, metal rebar) and energy (Jet Fuel A1, JP54, D6, D2 and EN590 10 ppm). Other products can be discussed.
Yes. Cuplock scaffolding, tubes, fittings and boards are available for sale or rental.
Standards from 1.0 to 3.0 m (5.0 to 16.1 kg) with a cup every 500 mm; ledgers from 0.6 to 2.5 m (2.3 to 9.5 kg). All are 48.3 mm × 3.2 mm steel tube.
LVL boards, BS 2482 timber boards with galvanised end bands, and steel planks, all 38 × 225 mm, in 3000 and 3900 mm lengths (cut sizes on request).
Double-width towers: 700 kg total including self-weight, 250 kg per platform. Single-width: 600 kg and 225 kg. Podiums and folding towers: 150 kg.
Calcium sulphate panels (incombustible, REI 90 / RE 120) for offices and data rooms; chipboard panels for economical office floors; inert 13 mm panels when the finish is natural stone.
Gabbro aggregates in 0–5, 5–10, 10–20, 20–25, 20–32, 20–37.5 and 20–42 mm.
Yes. Our steel-framed portable and modular buildings can be hired or bought, and adapted to your needs.
Yes. The fabric is Class A non-combustible, based on ultra-fine silica fibre, and all parts and zips are non-flammable.
No. They connect over Wi-Fi through one gateway and send alerts by SMS, email or phone call.
Still have a question? Contact our team or call +971 4 267 6703.
We are always interested in people who know doors, building materials and good service.
Example role areas: HMI to confirm current openings
Sales engineers and estimators for doors, docking and construction products.
Door and shutter technicians, motor and automation specialists.
Procurement, logistics and commodity trading support.
Send your CV to info@hmi.group with the position you are interested in. Confirm careers email
Request a quote, a datasheet or support in three quick steps. Every request gets a ticket number you can track here.
Choose one or more.
Your ticket number is . It is now in our request queue and a member of the team will contact you. For anything urgent, call +971 4 267 6703.
Enter your ticket number, e.g. HMI-482913.
Demo: tickets are stored in this browser only. On the live site every request opens a ticket in the HMI Support helpdesk, where you can also follow its status.
HMI Building Material Trading LLC
Dubai, UAE · P.O. Box 94358
Opening hours: to be confirmed
Last updated: launch date
HMI Building Material Trading LLC ("HMI", "we", "us") respects your privacy. This policy explains how we collect, use, share and protect personal data when you visit hmi.group or contact us, in line with the UAE Federal Decree-Law No. 45 of 2021 on the Protection of Personal Data (PDPL) and other applicable UAE laws.
We process personal data on the basis of your consent, to take steps at your request before entering a contract, to perform a contract, or where required by law.
We use essential cookies to make the website work and, with your consent, analytics cookies to understand how visitors use it. You can change your cookie choices at any time in your browser settings.
We do not sell personal data. We share it only with trusted service providers who help us run our website and business (for example hosting, email and analytics providers), under contracts that require them to protect it, or when the law requires us to.
Some of our service providers may store data outside the UAE. Where this happens, we make sure appropriate safeguards are in place as required by the PDPL.
We keep personal data only as long as needed for the purposes above or as required by law, then delete or anonymise it.
We use appropriate technical and organisational measures to protect personal data against loss, misuse and unauthorised access.
Under the PDPL you may ask to access, correct or delete your personal data, restrict or object to its processing, receive it in a portable format, and withdraw consent at any time. To make a request, email info@hmi.group. You may also contact the UAE Data Office.
Our website and services are intended for businesses and are not directed at children.
We may update this policy from time to time. The latest version will always be on this page.
HMI Building Material Trading LLC
Street 5, Ras Al Khor Industrial Area 1, Dubai, UAE · P.O. Box 94358
Phone: +971 4 267 6703
Email: info@hmi.group
Have this policy reviewed by HMI’s legal adviser before launch.
Last updated: launch date
These terms apply to your use of hmi.group, operated by HMI Building Material Trading LLC, Dubai, United Arab Emirates (trade licence no. to be confirmed). By using the website you agree to them.
You may use this website for lawful purposes only. You must not misuse it, attempt to gain unauthorised access, or interfere with its operation or security.
Product descriptions, specifications and any estimates on this website are for general information. They are not an offer. Prices, specifications and lead times are confirmed only in a written quotation.
All content, including text, graphics, logos and design, belongs to HMI or its licensors and may not be copied or reused without written permission.
We are not responsible for the content or practices of websites linked from this site.
To the extent permitted by UAE law, we are not liable for any loss arising from use of, or inability to use, this website or its content.
Our use of personal data is described in our Privacy Policy.
We may update these terms at any time. Continued use of the website means you accept the updated terms.
These terms are governed by the laws of the United Arab Emirates as applied in the Emirate of Dubai, and disputes are subject to the exclusive jurisdiction of its courts.
Questions about these terms: info@hmi.group or +971 4 267 6703.
Live sign language is American Sign Language (ASL) only, by the open-source sign.mt engine. Arabic / Emirati sign language needs a licensed provider. Need help? Live support.
We’ll email the document to you shortly. Ticket .